Both PLG boards are on the selected midi channel 1,2 or 3. And for example -PLG An - on midi channel 1, PLG-DX - on midi channel 2 - I can’t separate and assign them. Both cards are on the same midi channel - 2 (default) Is this correct?
And there is doubt whether the settings in Voice -Utility-Plug-Native1 and Native2 are correct. Can I reset these settings when I reset Motif Es settings?

Motif ES6 - 05 September 2022 11:31 AM

Both PLG boards are on the selected midi channel 1,2 or 3. And for example -PLG An - on midi channel 1, PLG-DX - on midi channel 2 - I can’t separate and assign them. Both cards are on the same midi channel - 2 (default) Is this correct?

MIDI Ports and MIDI Channels are not the same thing! Think of a MIDI Port as a MIDI cable, that transmits 16 channels of MIDI data. The USB-MIDI interface of the Motif ES has 4 ports, resulting in 4 x 16 = 64 channels.

The MIDI Port setting (refer to page 75 of the manual) determines which port (1-4) of the USB-MIDI software driver that controls the PLG boards. The 16 parts of the internal tone generator are controlled via Port 1, so I suggest you assign the PLG boards to Port 2.

That way, your PLG boards are adressed like this:

PLG slot 1 = Port 2, channel 1
PLG slot 2 = Port 2, channel 2
PLG slot 3 = Port 2, channel 3

- H -

Thank you dear Henry!