I have a big problem I can not make the update to version 1.50.
I turn off the Motif I hold down the cursor UP and utilities together but it does no research of new firmaware and starts normally.
What can it be?
The other updates are all gone through.
Thanks in advance

Instructions from a Readme file:
“Connect the USB memory device copied in step 1 into the MOTIF XF. Power on the MOTIF XF while holding down the [Cursor UP] button and [UTILITY] buttons until the “MOTIF XF” logo appears on screen.”

I underlined an important part of the procedure.

Does that not work?

If that doesn’t work, do the [^](Cursor Up) and [UTILITY] buttons work normally on your XF otherwise?

After I released the keys normally starts the operating system without doing research firmware on the USB device.
I also tried changing the USB stick but nothing.
thanks

Does the “MOTIF XF” logo appear while you are holding down the [^] and [UTILITY] buttons? It will be at the top of the screen display, and it takes several seconds, so don’t let go of the buttons until that happens.

What is name of the file that you copied to the USB drive?

The buttons Utility cursor up and running.
I looked at the installed version and these are the data:

Motif XF Firmware version 1.40.0
Motif XF kernel version 2.6.10_mvl401 - 1.1.1 motif_xsmc.97
Motif XF contentsversion 1.40.0

Tanks

The logo appeared in the middle.
but now I tried it again and the upgrade and party with the logo at the top.
Maybe I pushed too hard or the cursor UP button and a little defective.
However, I am very happy and thank you very much for your friendliness and speed in responding.
Thanks again and sorry for my English.
Hello

OK, you’re welcome, I’m glad that you got it working.