Old Motifator threads are available in the Archive.
bestspec
Total Posts: 9
Joined 02-11-2019 status: Newcomer |
Hello,
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
A factory reset will restore User data. I therefore presume you have another reason for asking. What might that be? |
bestspec
Total Posts: 9
Joined 02-11-2019 status: Newcomer |
I want to load it into my Yamaha MODX. I don’t have Motif. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
This might be helpful:
|
bestspec
Total Posts: 9
Joined 02-11-2019 status: Newcomer |
Thanks. I know this thread. There are no USER banks and that’s why I am asking for USER banks (there are only Preset banks) |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
The closest I have to what you’re asking for is a factory “ALL” file (W7A and W8A) for the ES keyboard, which has the USR1 and USR2 Voice banks. They’re the same as those in the Rack ES, but of course no USR3, and not in Editor format. Perhaps that will help. If not, hopefully another member will have the Rack ES factory data. File Attachments
original_es.zip (File Size: 197KB - Downloads: 683) |
bestspec
Total Posts: 9
Joined 02-11-2019 status: Newcomer |
Thank you again but only the Editor format can help me (because I do not have Motif). Yamaha MODX can load files from old Motif in the Editor format only. I care the most about Motif Rack ES with USR3 so I will be grateful for your help. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
How about this? http://www.motifator.com/index.php?ACT=39&fid=113&aid=1711_8AXFMr5yUMPlaKKfyzWB&board_id=1 |
bestspec
Total Posts: 9
Joined 02-11-2019 status: Newcomer |
This is it. Thank you. Only missing USR1 and USR2 now in Editor format.I will be grateful if someone share it. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome.
Â
With the Editors for my XS and XF, I can open an “ALL” file (X0A or X3A) and then save an Editor file. If that can be done with the ES Editor, then the factory ES file I previously posted might be useful. |
bestspec
Total Posts: 9
Joined 02-11-2019 status: Newcomer |
Unfortunately ES Editor can read only w9e,w7e,w6e,w2e,m3e files.
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
OK, let’s try something else… I loaded the ES “ALL” file to my XF, opened the XF Editor, and synced it to my XF. I then saved the XF Editor file, creating an X3E one, ZIP attached. Can you use that? File Attachments
ES-USR1+2.zip (File Size: 112KB - Downloads: 586) |
bestspec
Total Posts: 9
Joined 02-11-2019 status: Newcomer |
Yes, I can use it. Thank you very much! |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome. |