I everyone.

Working with guitar arps I noticed this problem:

- INITIALIZED VOICE
- EDIT
- ELEMENT 1
- wave number 490

- COMMON EDIT
- F2 ARP Main
- SF1 ARP 1
- ARP tipe 1129 unplugged 4

It’s impossible to play this kind of arp! Even changing wave number or arp type number (always unplugged). There is a ghost note in the high octave that let the arp impossible to use.

Do I have some wrong setting?

Thanks for reply.

Max.
Motif XF

No one want to try?

Thanks for reply.

maxweb - 20 September 2017 07:48 PM

Working with guitar arps I noticed this problem:

- INITIALIZED VOICE
- EDIT
- ELEMENT 1
- wave number 490

- COMMON EDIT
- F2 ARP Main
- SF1 ARP 1
- ARP tipe 1129 unplugged 4

It’s impossible to play this kind of arp! Even changing wave number or arp type number (always unplugged). There is a ghost note in the high octave that let the arp impossible to use.

Yes, there’s a percussive accent. (For XS users who want to try this, Wave = 278, Arp = 810.) The ghost note is at G7. Of course, it’s only a “problem” if you don’t want the accent. :-)

 

maxweb -

Do I have some wrong setting?

If you’d like to use that Arp without the accent, you could edit the Oscillator Note Limit settings…
C -2 - F# 7 will cut G7 and above
G# 7 - F# 7 will cut only G7

The cut notes won’t be played by the Arp, but also can’t be played from the keyboard. In most cases that won’t be an issue.

Just one word to say, 5pinDIN: thanks! It works great.

maxweb - 08 December 2017 01:59 AM

Just one word to say, 5pinDIN: thanks! It works great.

Two words for you: You’re welcome!