There is a great voice on the PLG150-PF that I am using on a track of one of my songs.  Everything sounds great and as it should through the headphones and Main outs.  But when I change the outputs of the tracks to asL&R, everything moves as it is supposed to, BUT the voice for the plug-in does not sound or play back when it is selected to asL&R like all the other tracks.  What am I missing here?

Re: Plug-in voice not working for assignable outs

HELP!!!  Anybody got this one figured out?  I’m stumped!

Re: Plug-in voice not working for assignable outs

Patience, some of us don’t have all that hardware.
And don’t post everywhere .....

;JOOP!

Re: Plug-in voice not working for assignable outs

Answered in your other post.

Re: Plug-in voice not working for assignable outs

MANY thanks to the Bad Mister, definitely the Motif guru. One point you made was exactly what I needed to solve the problem. In assigning all of the tracks of the song to asL&R, I assumed that’s all I needed to do. But on the page to assign the output channels, F6 (toggles between PLG1-3 and 1-16) needed to be entered to get to where the Plug-in board allows someone to specifically assign the output channel to these boards. Having done that, it was magic! So as a recap in how to get Plug-in patches that are part of a song assigned to asL&R:

Press [SONG]
Press [MIXING]
Press [EDIT]
Press [F2] OUTPUT
Press [SF3] SELECT
Scroll through (to the right) and change the appropriate TRACKS to [asL&R]
Press [F6] PLG1-3
Scroll (right if neede) to appropriate Plug-in board and change to [asL&R]

NOTE: This will NOT effect you being able to use the Plug-in boards in VOICE Mode in the normal L&R Outputs - I checked and it works just fine.

That should get you up and running allowing the patch from the Plug-in board to work in the asL&R outputs. Happy sequencing!