mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

rssFeeds [Syndicate]

Welcome to the support section.

Motif XS/XF: Parameter with Voice

If you want to bring a VOICE into a PATTERN or SONG MIXING setup (or into a PERFORMANCE) as it is setup in VOICE mode, remember to turn the PARAMETER WITH VOICE parameter ON first.

From [SONG] or [PATTERN] mode
Press [MIXING]
Press [EDIT]
Press Track Select button [1]
This will allow you to see the parameters for the Voice in PART 01
Press [F1] VOICE
Press [SF1] VOICE
Find the parameter called “Param. with Voice”
Highlight this parameter and turn it ON


Now move up and select your Voice, by BANK and NUMBER.. by doing so the XS will automatically copy in the arps and all the parameters listed below:

Parameter with Voice set to ON:
Determines whether or not the following parameter settings of the selected Voice are copied from the Voice to the current Part when you change a Voice for the current Part individually.
• Arpeggio settings
• Filter Cutoff Frequency
• Filter Resonance
• Amplitude EG
• Filter EG
• Pitch Bend Range (Upper/Lower)
• Note Shift

Note: Regardless of the Parameter with Voice setting, the following settings are always copied when a Normal Voice is selected: Mono/Poly, Porta Sw (Portamento Part Switch), Porta Time (Portamento Time) and Porta Mode (Portamento Mode).