Old Motifator threads are available in the Archive.
alexanderthegreat
Total Posts: 10
Joined 07-11-2019 status: Newcomer |
Sorry to be a pain but I can not load wav files from my flash memory. i installed a 1gb flash and formatted it and its good to go, but when it comes to loading the samples to a track i can not find a option to do so. I can only load the wav files that are on my usb, I want to be able to use the sounds from my flash memory and save the song with the flash memory samples so when I go back and load the song the samples are there without me having to look for them and reload them. Please help me out. Thank you in advance. |
alexanderthegreat
Total Posts: 10
Joined 07-11-2019 status: Newcomer |
Bump....Tried search but its just too broad. If someone can point me to the track direction. I found this:
2) Pull up User Voice patch you’ll be loading wav files to. 3) Initialize/scrub the patch by pressing [Job], press [F1] ‘Init’, press [Enter], then press [Inc/Yes] to confirm 4) Press the [File] button 5) Set ‘Type’ to ‘WAV’ 6) Select wav file from list at top of display 7) Once the file is highlighted, cursor right, then cursor into the ‘Key’ box 8) Set ‘Key’ box to ‘All’ 9) Cursor down to ‘Load’ box and set destination where you want the WAV stored *Note: ‘User’ .wavs are volatile . Wavs will be lost when XF is powerd off. Wavs loaded to ‘FL1’ or ‘FL2’ internal flash memory will be retained, 10) Press [F6] ‘Load Multi’ 11) Press [INC/Yes] to confirm load. Where are the user voice patches? I am in song mode and i don’t see an user voice patch I can initialize. I don’t want to mess around and erase any of the factory sounds, I need a blank patch where I can load my Wav files to. Please guys help! |