mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

rssFeeds [Syndicate]


forumforum
 

Old Motifator threads are available in the Archive.

Viewing topic "XS8 EG/EQ tab"

     
Posted on: May 15, 2020 @ 07:23 AM
Analogue
Total Posts:  5
Joined  04-19-2010
status: Newcomer

If I open the EG/EQ tab on my XS8 I can change the AEG (VCA)settings with the ADSR knobs but if I drop the curser down to the FEG row the knobs still alter the AEG settings.
Is it possible to flip the knobs so that they change to alter the filter EG (FEG)settings?
Thanks

  [ Ignore ]  

Posted on: May 15, 2020 @ 08:35 AM
5pinDIN
Avatar
Total Posts:  11356
Joined  09-16-2010
status: Legend
Analogue - 15 May 2020 07:23 AM

[...]
Is it possible to flip the knobs so that they change to alter the filter EG (FEG)settings?

No, those knobs are dedicated to adjusting Amplitude levels (volume).

There are three ways to adjust the FEG levels…
1) Using the XS cursor keys, highlight the Parameter and use the Data Dial to change the setting.
2) Attach a USB ASCII keyboard to the XS TO DEVICE port. Using that keyboard’s cursor keys, highlight the Parameter and change the setting with the [+]/[-] keys.
3) Run the Yamaha XS Editor and adjust using a mouse.

  [ Ignore ]  

Posted on: May 15, 2020 @ 02:01 PM
5pinDIN
Avatar
Total Posts:  11356
Joined  09-16-2010
status: Legend

Actually, there’s another way to adjust FEG levels, using knobs. If a Voice isn’t already using the ASSIGN 1 and ASSIGN 2 knobs for another purpose (or that usage isn’t critical), they could be assigned via Controller Set to any two of the following…
FEG attack
FEG decay 1
FEG decay 2
FEG release
...with the choice of application to any or all of the eight Elements.

  [ Ignore ]  

Posted on: May 17, 2020 @ 12:01 AM
Analogue
Total Posts:  5
Joined  04-19-2010
status: Newcomer

Thanks for the info and the way round with Assign. much appreciated.

  [ Ignore ]