mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

rssFeeds [Syndicate]


forumforum
 

Old Motifator threads are available in the Archive.

Viewing topic "PortaSW & Assignable Function ?"

     
Posted on: March 19, 2018 @ 07:21 AM
paricha
Avatar
Total Posts:  5
Joined  10-19-2017
status: Newcomer

Is it possible to assign the PortaSw on/off to one of the Assignable Function buttons. I’ve been trying to figure this out. Any help would be appreciated.

  [ Ignore ]  

Posted on: March 19, 2018 @ 08:51 AM
5pinDIN
Avatar
Total Posts:  10156
Joined  09-16-2010
status: Legend

Welcome to the forum.

There is no selection for setting an AF button to control the Portamento Switch. However, it’s possible to have the same effect.

If you want portamento for the Voice to normally be on, and an AF to turn it off…
In Common Edit, set Portamento Time as desired.
Set the Source of a Controller Set for one of the AF buttons.
Set the Destination to Portamento Time.
Set the Depth to -64.
That should reduce the Portamento Time to 0(zero) (effectively off) when the AF button is on.

Alternatively, if you want portamento for the Voice to normally be off, and an AF to turn it on…
In Common Edit, set Portamento Time to 0(zero).
Set the Source of a Controller Set for one of the AF buttons.
Set the Destination to Portamento Time.
Turn the AF button on.
Set the Depth to a positive value, as desired.
That should turn portamento on when the AF button is on.

  [ Ignore ]  

Posted on: March 21, 2018 @ 05:56 AM
paricha
Avatar
Total Posts:  5
Joined  10-19-2017
status: Newcomer

Thank you for your help

  [ Ignore ]  

Posted on: March 21, 2018 @ 11:41 AM
5pinDIN
Avatar
Total Posts:  10156
Joined  09-16-2010
status: Legend
paricha - 21 March 2018 05:56 AM

Thank you for your help

You’re welcome.

  [ Ignore ]