Old Motifator threads are available in the Archive.
musickeysman
Total Posts: 53
Joined 08-15-2003 status: Experienced |
I installed a 512 memory module and down loaded the chick C files from Yamaha site
when I try to install in on my moxf6 it takes over 10 minutes to load then I press the voice button and no sound anywhere on the keyboard I did a factory rest and tries it again the same thing happens I tried it again after reformatted the 512 module the same thing am I missing a step??
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
It’s unclear to me what you’re saying is happening. If you do a factory reset, do the Preset Voices work? |
musickeysman
Total Posts: 53
Joined 08-15-2003 status: Experienced |
yes it goes back to original setting and the sounds work but when I try to load Chick’s pianos again it no sounds any where |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
If loading that file causes the Presets to no longer sound, something might be wrong with the file. However, first let’s check something else. Which version of the OS (firmware) is installed in your MOXF?
To check…
What do you see? |
musickeysman
Total Posts: 53
Joined 08-15-2003 status: Experienced |
The firm ware is V1.03.0 I am going to try another file now
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Your MOXF is running an old version of the firmware. I suggest that you update the OS. The most recent version is 1.12. https://usa.yamaha.com/files/download/software/0/822670/moxf_v112.zip Please read and follow the documentation included in the ZIP file. |
musickeysman
Total Posts: 53
Joined 08-15-2003 status: Experienced |
HI Buddy no good same thing after trying to in files there in no sound out of the keyboard.. Am I doing something wrong after install complete I press the voice button should I have turned it of and on first?? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
1) Are you allowing the library installation to fully complete? It takes about 5 minutes per 128MB to load, so about 20 minutes for 512MB. 2) Did you update the OS? 3) What is the full name and size (in MB) of each of the files you have tried to load? |
musickeysman
Total Posts: 53
Joined 08-15-2003 status: Experienced |
Yes I updated the os
Ok I just loaded INSPFLSH.X6A from Yamaha site And it loaded fine.
1 more question I have about 6 libraries for xf I know with my xs I can’t pull out a separate voices
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Yes, it’s possible that the copy of the Chick’s file you have is corrupted.
Â
Individual Voices can be loaded into an XS, from an XS “All"/X0A or “All voice"/X0V file, and some others.
Â
You can load individual XF Voices, along with any necessary Samples/Waveforms. See the Description for “Voice” on page 156 of the MOXF Reference Manual (http://download.yamaha.com/file/60478). Of course, you’ll need to make sure there’s sufficient room on the flash module for all you want to load. See [SF1]CURRENT, and determine what the Free memory is before trying to load.
You’re welcome. |