Old Motifator threads are available in the Archive.
salvosound
Total Posts: 99
Joined 03-08-2013 status: Experienced |
Hi people,
1) Connect a compatible USB storage drive
I set the trigger level to “manual” the first time and to “1” the second time....nothing changes...when i connect the usb drive to the pc and play the wav song i can’t listen it because is very very low.
Any helps?
Salvo |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
The trigger level setting doesn’t affect the volume of the recorded WAV file.
Â
This article might help:
If for any reason you don’t want to reset levels, you could try to “normalize” the recording instead. The WAV you saved can be loaded back into the XF, the Integrated Sampling Job “Normalize” applied, and then the resulting WAV resaved to USB. Alternatively, you could normalize the WAV file using a program such as “Audacity” (http://www.audacityteam.org/). |
salvosound
Total Posts: 99
Joined 03-08-2013 status: Experienced |
Thank you very much i Will try :) |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome. If you have questions about procedures, just ask. |