mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

rssFeeds [Syndicate]


forumforum
 

Old Motifator threads are available in the Archive.

Viewing topic "(MIDI) Problems with bank change in Performance mode controlled by G8"

     
Posted on: April 04, 2017 @ 11:49 PM
lexe-motifxf
Total Posts:  2
Joined  04-04-2017
status: Newcomer

Hey.

I use Motif XF6 and Roland G8. I control the xf via midi from my G8.
Everything works perfect with changing sounds, splitting,.....

But: in performance mode on the XF(xf) it isn’t possible to change the user-banks (control on G8!). It only works in user1.

In voice mode every user-bank-changes work perfectly.

A friend of mine has the same problem but both of us can’t explain why it doesn’t work.

I hope someone understand my problem an can help :-)

THX

  [ Ignore ]  

Posted on: April 05, 2017 @ 03:09 AM
5pinDIN
Avatar
Total Posts:  9120
Joined  09-16-2010
status: Guru
lexe-motifxf - 04 April 2017 11:49 PM

[...] But: in performance mode on the XF(xf) it isn’t possible to change the user-banks (control on G8!). It only works in user1. [...]

Welcome to the forum.

The following is from page 127 of the XF Data List (http://download.yamaha.com/file/52366).
MSB/LSB for Performance mode Bank Select:
63/64   User 1
63/65   User 2
63/66   User 3
63/67   User 4

If Bank Select works for Voice mode, it should work for Performance mode as well. If not, make sure the G8 is sending those numbers - some devices count starting at 0(zero), others start with 1(one). Using MIDI-OX (http://www.midiox.com/), I verified that the MSB/LSB above work when the XF is in Performance mode.

  [ Ignore ]  

Posted on: April 05, 2017 @ 03:33 AM
lexe-motifxf
Total Posts:  2
Joined  04-04-2017
status: Newcomer

Hey,

thx for answering.

I’ll try it with your parameters (63/65).
Hope it’ll work then :-)

  [ Ignore ]