Old Motifator threads are available in the Archive.
John M.
Total Posts: 46
Joined 12-07-2008 status: Regular |
Hello everyone! I’m trying to achieve the following:
- playing 15 measures (intro) of Dancing on the ceiling on my Motif XS by starting a midifile
I already succeeded to import the performance into the song, but it is not possible to use the performance in the right way. At first the midifile also changed the sounds of the performance but by deleting program change event I solved this problem. Remaining problem: Now the display is showing the correct soundnames but I can only hear 1 part of 4 Any suggestions? Kind regards John |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
It’s not exactly clear to me what you’ve done, and what you want to do. How many Parts are currently being used to play the Song sequence? Are those Parts the same ones you want to play from the keyboard? Please explain in more detail “I can only hear 1 part of 4”. Does that refer to playing the sequence, or using the keyboard? |
John M.
Total Posts: 46
Joined 12-07-2008 status: Regular |
@5pinDIN Dear Mr. 5pinDIN, Thank you for taking interest in my problem. I’m including 2 pictures. “Measure 1 Dancing” is showing the display after importing the performance “Power Section” into the song Dancing on the ceiling. So the song is on tracks 1-6 and the performance is on 9-12. Before starting the sequencer is play the performance and same is sounding correctly (only track light 9 is on!) 2 sounds left and 2 sound right of keysplit. So far no problem. “Measure 2 Dancing” After starting the sequencer the sounds of the performance are changing in measure 2 apparently due to a program change command! The song is playing correctly but from the the performance only part 9 can be played and heard. How is it possible to play the performance from picture 1 when the song is playing? Image Attachments
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Was the file a General MIDI (GM) type? I suspect that’s the case, because in “Measure 2 Dancing” Parts 8, 9 & 11-16 are set to “Concert Grand” and Part 10 is set to “Stereo GM Kit”, which are defaults for GM. That suggests the file has a GM Reset command, typically found near the beginning of Track 1.
See http://www.motifator.com/index.php/support/view/a_short_tutorial_creating_proper_gm_files
Without a GM Reset, you may have to select the Voices for the sequenced Parts (1-7), and then STORE those changes. |
John M.
Total Posts: 46
Joined 12-07-2008 status: Regular |
Thank you so much for your advise! It was indeed a GM Reset command that made it impossible to play the performance simultaneously with the midifile. Problem solved, I’m more than happy. |