Old Motifator threads are available in the Archive.
blafot
Total Posts: 105
Joined 05-04-2015 status: Pro |
Hi. I have built my self a really cheap device to use my old BC1 from my DX7 with my MOXF8. It uses a 9 v battery to feed the BC and sends the voltage from blowing (0 to +5 v) to the controller pedal (sxpression) input and then you can adjust the expression by blowing. Cool! Good for layering sounds and blow the horns. But… If you change controller for FC to bc CC2 and edit sounds to resopnd to BC with both filter (cutoff...) and volume (for all or just some elements) it gets really cool… I play Piano/bass splitted and piano dubbled with strings using an external FCB1010 as expression. The second foot controller from FCB act as a FC for a dubbled hammond sound… And… when I blow It doubbles with Brass section that has no sustain pedal. Mix mode cause its 5 sounds. I have been using this setup for years using a CME UF8 and BC with my laptop and now I have testing this for 9 shows and it works great. So. I made a deskription of how I made it and where I found the information on the net and I put it on my website. Its just how I made it… and for me it works. So dont blame me if it does not work for you… I did not pay anything but the battery… Had all stuff in a throw-away-box in my basement. The description is in swedidh but at the right bottom is a yellow TRANSLATE where google translate can translate it for you… I know… google translate but its better then nothing and I will not rewrite everything in egnlish… So. I found info on the web and discussed it with 5PinDin (Thanx) here at motifator and made it so I do not take credit for it. And I also do not take any responsibillisies for any damage or so… But mine works. Tell me if you like it and if it works for you. I have built a dual cable output as it is not the same for yamaha as for roland and I want to use it in both, and it works. I also added my modifyed WindSynth sound there for download. http://blafotproduktion.se/breath-controller-adapter/
Good luck!
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
My participation in this was limited to explaining the differences between expression pedal circuitry used by Yamaha versus that of other brands. See http://www.motifator.com/index.php/forum/viewthread/477178/
The circuit described by blafot apparently works with his MOXF, and that’s great. However, please note that I did not design the original or modified circuit - I only described the TRS connections, as in the above linked thread.
|
blafot
Total Posts: 105
Joined 05-04-2015 status: Pro |
5PinDin, noone can hold you responsible for anything in this box, but I could not have built it without your help, explaining the Yamaha trs vs ts.
/M |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Someone who understands what was described should find the information interesting, but there might be those who could create problems for themselves. I hope you understand that since you disclaimed any responsibility, I also felt the need to do so. |
blafot
Total Posts: 105
Joined 05-04-2015 status: Pro |
Hi. Yes. Good point.
|