Hi everybody,

I’ve four parts layered with the mixing mode assigned to midi channel 1 and another one assigned to midi channel 2.
During the execution I need to switch the midi channel from 1 to 2 and back in order to have different sounds on the XS: 
- when I’m playing with mixing mode I just must click on the “part 2” or “part 1” and it’s ok
- when I’m playing the mix in master mode I can’t do that. There’s a way to switch the midi channel in the master mode ?

Thank you.

Welcome to the forum.

The answer to your question depends on whether the Zone Switch in Master mode is “on” or “off”. Which is it, and why do you have it set that way?

I’ve set zone switch mode to “off”.

And I’ve set the mix that way because i needed more key (I own a XS7) for a lead synth sound.

Marksynth82 - 01 February 2017 10:48 AM

I’ve set zone switch mode to “off”.

In Master mode, with the Zone Switch “off”, you should be able to make selections as in Song/Pattern modes. Press the [TRACK] button, then use the [1]~[16] numbered buttons.

Thank you for the answer, it works.

Regards