Old Motifator threads are available in the Archive.
chensa
Total Posts: 87
Joined 08-04-2004 status: Experienced |
So I have this filter sweep that I’ve programmed that does it’s thing...basically goes up...hangs out for a few seconds, then falls. Can I assign a knob or something to enable me to completely control the sweep so that I can make the sweep less or more in real time? Thanks. |
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
You can program the ribbon controller, the mod wheel, or one of the assignable knobs to control cutoff at the voice level (common edit). |
chensa
Total Posts: 87
Joined 08-04-2004 status: Experienced |
I thought so, but I haven’t been able to make it work. I’ve been using the FEG to create the sweep, do I use one of those ATK, DC1 DC2 as the Destination? Because it doesn’t seem to be working. And I don’t simply want to play with the cutoff frequency because it’s not the desired effect. |
stoneb3
Total Posts: 851
Joined 06-05-2011 status: Guru |
Take a look a TrncHook located in Pre6 A11, a one Element Voice.
Notice: Common Edit>Ctrl Set>Set 1/2. Source=MW, Dest=FLT-Frq, Depth= -14.
Post back with any questions.
|
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
Now I’m confused...why is using the dedicated cutoff knob not the desired effect? |
chensa
Total Posts: 87
Joined 08-04-2004 status: Experienced |
Ok, so maybe I should share an example of the desired effect that I’m looking for. Please review the last “part” of Shine on you Crazy Diamond VI-IX. I am trying to control the rising and falling sound that is similar to the synth that is accompanying the solo. The Cutoff Frequency is not exactly the same unless someone can help me figure out how to make it do just that. I have my sound doing those rises and falls on it’s own, but I would like to be able to have control over it so that it’s not “predictable”. Make sense? |
stoneb3
Total Posts: 851
Joined 06-05-2011 status: Guru |
I thought I wasn’t, kinda sorta maybe. |
stoneb3
Total Posts: 851
Joined 06-05-2011 status: Guru |
Roughly where in time on the track? When you mention your sound “rising and falling”, do you mean in pitch or tonality? |
chensa
Total Posts: 87
Joined 08-04-2004 status: Experienced |
The last “part” also known as part IX also located beginning at 8:50. Here is a link https://youtu.be/bWPjYWgRdtM |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
Unless I am mistaken, that is just a sweep of the cutoff frequency and was probably done by hand on the recording. |