I’ve gone thru both the Motif XF Ref and Owner’s Manual and for the life of me I can’t find a definitive step-by-step process to save an All File backup to my Flash Modules (have 2 of the 1G Flash installed). I can however save a backup to a thumb drive, but it seems I have a mental block on how to save internaly to the nonvolatile flash boards. When I enter the File mode and scroll to Device, there’s nothing there to select, just a downpointing arrow with no selections. I do see my FL1 & FL2 boards when I enter the Utility button. So, could I please have some assistance on a walkthru on saving backups to Flash.  THX!

You can SAVE an “All” file from your XF to a USB or networked drive.

You can LOAD an “All” file from a USB or networked drive to your XF,
and direct Waveforms/Samples to the flash modules.

You can’t SAVE an “All” file to the flash modules.

Thx again 5pin. That ‘splains it all!

5pinDIN - 06 November 2016 04:19 PM

You can SAVE an “All” file from your XF to a USB or networked drive.

You can LOAD an “All” file from a USB or networked drive to your XF,
and direct Waveforms/Samples to the flash modules.

You can’t SAVE an “All” file to the flash modules.

Thank you, I did this, but when I try to load the files, the directory is empty.

Ajay shah - 28 November 2016 02:15 PM

5pinDIN - 06 November 2016 04:19 PM

You can SAVE an “All” file from your XF to a USB or networked drive.

You can LOAD an “All” file from a USB or networked drive to your XF,
and direct Waveforms/Samples to the flash modules.

You can’t SAVE an “All” file to the flash modules.

Thank you, I did this, but when I try to load the files, the directory is empty.

See http://www.motifator.com/index.php/forum/viewthread/478370