Old Motifator threads are available in the Archive.
gamazz
Total Posts: 91
Joined 11-13-2004 status: Experienced |
I have loaded a wav sample at c1 on my MOXf8 . chose a voice to replace went to job initialized it. then i go to edit and i have no OSC. i see name,Main, Sub catigories only. i have name-SF1 ply modeSF2 portaSF3 otherSF4
OSC ISN’T SHOWING. IS THERE SOMETHING I FORGOT OR MISSED? |
cmayhle
Total Posts: 3116
Joined 10-05-2011 status: Guru |
The problem is, you are in COMMON Edit. You need to get to ELEMENT Edit: WAVE (Waveform) is a per ELEMENT assignment. See page 38 of the MOXF Reference Manual. |
gamazz
Total Posts: 91
Joined 11-13-2004 status: Experienced |
I found the page but it doesn’t actually say how to change it at least i cant find anything that tells me how |
gamazz
Total Posts: 91
Joined 11-13-2004 status: Experienced |
i’ve read it over several times and cant find anything that tells me how to change to elements. very frustrating |
cmayhle
Total Posts: 3116
Joined 10-05-2011 status: Guru |
Once you hit the Edit Button, you are in COMMON Edit. To enter ELEMENT Edit, you must then hit the appropriately numbered PART[ELEMENT] button 1-8, to call up the desired ELEMENT for Editing. See page 15 of the MOXF Owner’s Manual for a chart on using the Numbered Buttons to select ELEMENTS for Editing...as well as other uses for these important buttons. |
gamazz
Total Posts: 91
Joined 11-13-2004 status: Experienced |
Thanks got it. i was confused about the part select buttons |