Hi,
Trying to load the Hybrid3.X6A file, but cant see it.

Scrolled to “all” and does not show on the file list, but the X3A shows fine.

Tried 2 different thumb drives.

The read me page for this files states:
An optional Flash Expansion Memory Module is required for loading the file into a MOXF. The soundset contains 55 User Waveforms with a size of about 194MB.

I do have 2 boards installed to hold samples......i believe these are the boards they are talking about?

Why cant i see the X6A file?

Any advice is appreciated.
Thanks

Paul S.

no expert here.
but I googled and found this.
not sure if it applies to your hybrid file.
read Bad Mister’s post:

http://www.motifator.com/index.php/forum/viewthread/470812/

bunzi1964 - 06 April 2016 07:41 PM

Hi,
Trying to load the Hybrid3.X6A file, but cant see it.

Scrolled to “all” and does not show on the file list, but the X3A shows fine.

[...]

Why cant i see the X6A file?

The thread chasmanian referred you to explains the problem. You’re trying to load a file meant for a MOXF into your Motif XF.

The XF “knows” which files are correct for it, and properly shows the X3A one, and not the X6A.

See page 236 of the XF Reference Manual (http://download.yamaha.com/file/48531) for a listing of file types compatible with the XF.

Ahhhh, ok i see.
Now i see the X6A file is for the MOXF and the X3A file is for the Motif XF. I thought that both files where supposed to be loaded, but now i see just the X3A file is needed.
Thought the MOXF was short for Motif XF, now i see they are different keyboards.
Thanks for the help all!
Paul S

5pinDIN - 06 April 2016 08:58 PM

bunzi1964 - 06 April 2016 07:41 PM

Hi,
Trying to load the Hybrid3.X6A file, but cant see it.

Scrolled to “all” and does not show on the file list, but the X3A shows fine.

[...]

Why cant i see the X6A file?

The thread chasmanian referred you to explains the problem. You’re trying to load a file meant for a MOXF into your Motif XF.

The XF “knows” which files are correct for it, and properly shows the X3A one, and not the X6A.

See page 236 of the XF Reference Manual (http://download.yamaha.com/file/48531) for a listing of file types compatible with the XF.

Hi, this links to something I want to accomplish: I have a gig abroad and can’t bring my MOXF8, so I have to rent a synth abroad. They don’t have a MOXF available for hiring, but a Motif might be. Is there any way how I can transfer my performances from the MOXF to the Motif?
(I learned in this thread that a Motif can’t read the .x6a file...)

renejansen - 05 April 2017 03:32 PM

Hi, this links to something I want to accomplish: I have a gig abroad and can’t bring my MOXF8, so I have to rent a synth abroad. They don’t have a MOXF available for hiring, but a Motif might be. Is there any way how I can transfer my performances from the MOXF to the Motif?
(I learned in this thread that a Motif can’t read the .x6a file...)

Welcome to the forum.

The closest Motif to a MOXF is the Motif XF. Third party software can help with file conversion, but there might still be some issues. This thread could be helpful in determining if there would be a problem:
http://www.motifator.com/index.php/forum/viewthread/473699