Old Motifator threads are available in the Archive.
printer221
Total Posts: 26
Joined 08-05-2015 status: Regular |
So I installed two 512 mb of sampling memory totalling to 1 gb of RAM. At first the screen was going blank when I turned the motif on so I moved the slots around and now when I hit integrated sampling the motif just freezes. What’s going on? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Not all DIMMs are compatible with Motifs. See page 289 of the ES Owner’s Manual for related information. (It was later determined that compatible 512MB DIMMs work in the ES, so the stated 256MB maximum size isn’t correct.) |
printer221
Total Posts: 26
Joined 08-05-2015 status: Regular |
You think that’s what’s causing it to freeze? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
I think you should run diagnostic tests 23 and 24:
Be sure to save an “All” file first if you have data you care about. |
printer221
Total Posts: 26
Joined 08-05-2015 status: Regular |
What does NG mean for test #23? For test #24 it just keeps saying “Now executing...” |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
The memory failed the test. NG = No Good. Test 23 is a simple Read/Write test. Sometimes marginal memory will pass that, but more in-depth testing in 24 can find problems. For 1GB, test 24 can take close to 2 hours to run. However, since test 23 failed, there’s not much point in running 24. |
mozizo
Total Posts: 59
Joined 01-18-2006 status: Experienced |
Just wanted to post the same problem and came across this topic.
|
mozizo
Total Posts: 59
Joined 01-18-2006 status: Experienced |
Just a quick update.
|