mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

newProducts [YOK]

rssFeeds [Syndicate]


forumforum
 

Old Motifator threads are available in the Archive.

Viewing topic "Effect Data Assign Table"

     
Posted on: August 08, 2015 @ 09:48 AM
hrlmbrn
Total Posts:  5
Joined  03-23-2011
status: Newcomer

In the Effect Data Assign Table in the Data List booklet for the MOTIF XS, I am not clear on how to interpret the numbers in the value columns in some of the tables; specifically, Table 1 - LFO Frequency (Do the numbers in this table represent hz?); Table 2 - Modulation Delay Offset, Table 4 - Reverb Time, Table 6 - Room Size.  Do some of the values represent units of measurement, ratios? An explanation would be helpful.  Thanks.

  [ Ignore ]  

Posted on: August 08, 2015 @ 06:14 PM
5pinDIN
Avatar
Total Posts:  10822
Joined  09-16-2010
status: Legend

See the Effect Parameter List beginning on page 35 of the XS Data List. The units are given for each Parameter in the “Range” column, and the applicable table is under “Table No.”.

For example - G CHORUS on page 36, the LFO Speed (frequency) Range is 0.0Hz - 39.70Hz, Table No. 1.

By the way, it would be better to post questions related to the Motif XS in the forum for that model:
http://www.motifator.com/index.php/forum/index.php/viewforum/108/

  [ Ignore ]  

Posted on: August 09, 2015 @ 04:37 PM
hrlmbrn
Total Posts:  5
Joined  03-23-2011
status: Newcomer

Thank you, sir!  Yes, it’s true: Reading is Fundamental.

  [ Ignore ]  

Posted on: August 09, 2015 @ 05:37 PM
5pinDIN
Avatar
Total Posts:  10822
Joined  09-16-2010
status: Legend
hrlmbrn - 09 August 2015 04:37 PM

Thank you, sir!

You’re welcome!

 

hrlmbrn -

Yes, it’s true: Reading is Fundamental.

Indeed. If everyone read and understood everything in the manuals, my post count would be a lot lower.  ;-)

  [ Ignore ]  

Posted on: March 01, 2016 @ 03:17 AM
jrhythm
Total Posts:  9
Joined  11-17-2014
status: Newcomer

Keyword here: “Understood” :-) I’ve read (many times) the manual, but still get confused.

  [ Ignore ]