Old Motifator threads are available in the Archive.
Joshman
Total Posts: 208
Joined 10-28-2013 status: Enthusiast |
I JUST loaded some of the new B’s Knees Hammond Organ sounds and they are all great ! I am working with one of the double manuals where the lower half of the keyboard is used for comping and the top for leads. The lower part of the split is too loud and I want to lower the volume for that part of the split, but I do not know how to do that to a voice. I have done that very easily in a performance but the voice is different. Can anyone tell me how to do this? Many Thanks |
zpink
Total Posts: 427
Joined 08-02-2014 status: Enthusiast |
Not sure if this is the best way to do it since I’ve never had to myself. I’m always using the editor, but I guess this could also be done by some menu diving on the MOXF itself.
Unless someone that knows more than me answers, try that! ;-) |
bruceglan
Total Posts: 23
Joined 06-24-2014 status: Regular |
Hi Joshman, In voice mode press edit, this lights up the common mode button first, then press number 1 button in part select so you can edit the individual elements. The screen will show the wave form information and top left shows “EL 1” (in small letters for some reason easy to miss). If you then press the part select buttons till you find the element that’s too loud/quiet. Then press the AMP button (F 4) and the first highlighted section is “level”. Just lower it to the level you want. I hope this is correct as I’m new to this myself but it has worked for me.
Cheers
|
cmayhle
Total Posts: 3116
Joined 10-05-2011 status: Guru |
Remember, any Edits to a USER VOICE that you wish to retain requires that you execute the STORE function...otherwise the Edit(s) will be lost once you navigate away. |