Old Motifator threads are available in the Archive.
Woodbrook
Total Posts: 17
Joined 10-05-2010 status: Regular |
Ok, one more time. How do I transfer a .wav file from a USB stick to a track in a song file? Thanks in advance. |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
Technically speaking, you transfer the sample to a Motif XF VOICE, that Voice is assigned to PART of the Song or Pattern MIXING, which receives MIDI note data from a Track of the sequencer.
Insert USB stick with the .wav (16-bit, 44.1kHz) to the TO DEVICE port
Use the [>] RIGHT cursor arrow and the DOWN cursor to move to the Target
Set the PART into which you want create the new a User Sample Voice, 1-16
Press [SF2] LOAD This will load the WAV to the a USER SAMPLE VOICE (SP001) in your MIXING setup. Record the MIDI data to the corresponding Track of the sequencer, you trigger playback by pressing the a Target KEY, C3. |
Woodbrook
Total Posts: 17
Joined 10-05-2010 status: Regular |
“Record the MIDI data to the corresponding Track of the sequencer, you trigger playback by pressing the Target KEY, C3.” Thanks Bad_Mister. I’ve gotten up to this point in the past but can’t get the file to record to the track when pressing the C3 key. It plays, just doesn’t record. I’m almost there and will keep at it. I’m using the XF for a show and would like to keep everything on this keyboard during the performance. |
Woodbrook
Total Posts: 17
Joined 10-05-2010 status: Regular |
Got it to work!!! I think rebooting the synth had something to do with it. I’m a happy guy. |