Old Motifator threads are available in the Archive.
JSmoothKeys
Total Posts: 99
Joined 03-16-2011 status: Experienced |
Hi. In “Performance” mode, if 4 different Voices are selected in a Performance, how do you adjust the reverb volume level and other effects of each individual voice separately? Thank you |
MeMyselfAndI64
Total Posts: 201
Joined 11-12-2013 status: Enthusiast |
Press Pattern section button, All buttons but the 1-4 will be lit.
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Also see [F2]OUTPUT, [SF2]EF SEND on pages 66-67 of the MOXF Reference Manual. (However, the descriptions for Chorus Send and Reverb Send appear to be incorrect on those pages. See page 31 for the correct description.) |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
Here’s what you can do:
From the main PERFORMANCE screen press the button labeled [PERFORMANCE CONTROL].
The PART SELECT buttons [1]-[4] work with the [COMMON] button just above, such that whichever is lit is what you are set to control.
When PART 1 is lit, the 24 KNOB CONTROL Function on the left front panel apply to PART 1.
If you select PART [2] the Knobs now apply to PART 2, and so on.
So for example, if you are playing a PERFORMANCE that has DRUMS in PART 1 and you light PART SELECT [1], turning the CUTOFF knob will affect the Filter on the Drum Kit only. If you light [COMMON] all four PARTS of the PERFORMANCE will be affected by the CUTOFF knob. [PERFORMANCE CONTROL] gives you a command station to direct what gets affected. If you press both [KNOB CONTROL FUNCTION] buttons simultaneously all six lights in this area come on - to indicate you have now selected a function where knobs 1-4 are VOLUME for PARTS 1-4 and knobs 5-8 are corresponding PAN knobs for PARTS 1-4. |
JSmoothKeys
Total Posts: 99
Joined 03-16-2011 status: Experienced |
Thank you |