I currently have the MX61 and would like to upgrade to the MOXF6 I also use another keyboard to control the MX when I set up the keyboard to control the mx to change banks and presets I use
BANK MSB 63
BANK LSB 80
PROG CHANG 002 for example

Would those numbers be the same for the MOXF6 ?

Joshman - 19 November 2013 01:12 PM

I currently have the MX61 and would like to upgrade to the MOXF6 I also use another keyboard to control the MX when I set up the keyboard to control the mx to change banks and presets I use
BANK MSB 63
BANK LSB 80
PROG CHANG 002 for example

Would those numbers be the same for the MOXF6 ?

With the MX, MSB/LSB = 63/80 would select the Performance Bank.

With the MOFX, there are two Performance Banks:
MSB/LSB = 63/40 would be User 1
MSB/LSB = 63/41 would be User 2

Slight error 5pin ;-) on the moxf perf bank 1 is MSB 63 LSB 64.. and bank 2 is MSB 63 LSB 65

pax_eterna - 19 November 2013 02:54 PM

Slight error 5pin ;-) on the moxf perf bank 1 is MSB 63 LSB 64.. and bank 2 is MSB 63 LSB 65

Oops, you’re right. I accidentally gave the hex (rather than decimal) value for each of the MOXF LSBs. Thanks for the correction.

Ah Yes .. I just saw that post now.. I was experimenting and thought that I was going Crazy .. LoL
Thanks for the corrections

Also Discovered that for a Voice Change:
MSB=063
LSB=000
PRESET NUMBER EX: 001

Now that worked for Preset 1 but Im not sure if its different for other catagories ?

Just discovered something else:
When another keyboard is controlling the MOXF6
When changing from a Voice preset to a Performance Preset it made the change, but I had to physically depress the mode button to the other in order to hear the change.

Ex: I was controlling the MOXF6 from another midi keyboard when I made the change to a grand piano from my other device/keyboard, I wanted full grand (voice) to appear on the mosf6 but nothing changed on the screen on the moxf until I depressed the Voice button and saw that the change had been made but couldn’t hear the change until I did that..

Joshman - 03 December 2013 11:20 AM

Ah Yes .. I just saw that post now.. I was experimenting and thought that I was going Crazy .. LoL
Thanks for the corrections

Also Discovered that for a Voice Change:
MSB=063
LSB=000
PRESET NUMBER EX: 001

Now that worked for Preset 1 but Im not sure if its different for other catagories ?

For Normal Voice:
PRE2… MSB=63, LSB=01
PRE3… MSB=63, LSB=02
and so on

The Bank Select MIDI Data Table on page 123 of the MOXF Data List gives those and the rest.

Joshman - 03 December 2013 11:43 AM

Just discovered something else:
When another keyboard is controlling the MOXF6
When changing from a Voice preset to a Performance Preset it made the change, but I had to physically depress the mode button to the other in order to hear the change.

Ex: I was controlling the MOXF6 from another midi keyboard when I made the change to a grand piano from my other device/keyboard, I wanted full grand (voice) to appear on the mosf6 but nothing changed on the screen on the moxf until I depressed the Voice button and saw that the change had been made but couldn’t hear the change until I did that..

Under the Bank Select information in the Data List:
When only the Program Change is received after entering any of the mode, the corresponding voice in the currently selected Type/Memory is called up.
The Master number and the Performance/Song/Pattern/Voice mode can be changed only via the Parameter Change.

A Parameter Change message is SysEx.

MANY THANKS