Old Motifator threads are available in the Archive.
Andy M
Total Posts: 75
Joined 10-16-2012 status: Experienced |
To any Presonus Studio One users here… I’ve received so many questions from Studio One users on how use the MOX VST Editor in Studio One that I decided to compile my replies and edit them into a PDF file. Some of this info might me useful to users of other DAWs (apart from Cubase) too. Anyway, here it is - see attached. Cheers File Attachments
Yamaha MOX6 in Studio One.pdf (File Size: 695KB - Downloads: 1677) |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
Thank you, Andy, for taking the time to do this… I’m sure others will find it useful! Excellent! |
pranav_mox6
Total Posts: 38
Joined 05-24-2014 status: Regular |
Hi Andy M.
I tried all the steps you mentioned in the PDF. Everything went ok until i reached to the step where I had to record the audio track. But I dint get any audio. I dint see any wave graph in the audio event. Do I have to Change the MOX audio send channel to 1&2;? If yes then How can I do that in MOX utility as you mentioned it can be done there? I also tried switching USB I/O mode of MOX to either VST, 2 stereo rec or 1 stereo rec mode. but when I kept on 1 or 2 stereo rec mode, I got the error that “the Audio device Yamaha Steinberg USB has failed to start correctly”. then studio one gets hang. Attaching some screenshots. Please have a look at them. Image Attachments
|
rlared
Total Posts: 26
Joined 01-19-2013 status: Regular |
If your MOX is setup in 4-channel mode, you need to set your audio inputs for the audio channel to MOX outputs 3/4. Right now you probably have the inputs set to MOX outputs 1/2, which is for the aux input on the MOX. You may need to setup channels 3/4 in Studio One first.
Check this article by Bad Mister:
|
Tacman7
Total Posts: 680
Joined 06-16-2006 status: Guru |
I think the only way that I got the editor to work was using 4. That’s in the editor setup. I only want to use the editor, not the mox as an interface. |
pranav_mox6
Total Posts: 38
Joined 05-24-2014 status: Regular |
Did it. It worked but the music of the recorded data got messed up.
File Attachments
Mixdown.mp3 (File Size: 596KB - Downloads: 680) |
pranav_mox6
Total Posts: 38
Joined 05-24-2014 status: Regular |
I also got it worked. But I’m getting noise when the MOX is connected to USB from my audio interface. |
pblais
Total Posts: 95
Joined 03-05-2015 status: Experienced |
Hi Andy, Finally, I found someone who has run the editor and stuff in Studio One.
I am trying to follow the directions in your PDF file. But, my setup is different than yours.
Thanks in advance
|