Old Motifator threads are available in the Archive.
pax_eterna
Total Posts: 209
Joined 11-03-2013 status: Enthusiast |
Can the Motif XF Ending type arps be used on the MOXF? Or are they already in the arps library on the MOXF? I cannot find them if they are :( |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
You give us no clue how you are working. But “Ending” Arp TYPES all begin with the prefix EA or EB (for Ending A, Ending B). If you use the MOXF6/MOXF8 Editor you can simply use the SEARCH function (magnifying glass) just TYPE in “EA_” and all the “A” Endings will appear. If you type in “EB_” all the “B” Endings appear.
In general the prefix will tell you what is suggested for a Phrase:
The second letter is complexity: A, B, C, D where A is less complex than D And just FYI, the “ENDING” arps do not STOP automatically… they simply sound like an ending and have a blank measure or two at the end giving you time to manually press the ARP ON/OFF. |
pax_eterna
Total Posts: 209
Joined 11-03-2013 status: Enthusiast |
Thanks again BM for replying. Okay I get that. Not auto stopping is fine..a bar is plenty of time to turn it off...it (arp stop) can be assigned to a pedal can’t it? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
AFAIK, the MOXF has all the Arps that the XF has, plus another 100 of them. However, they aren’t all numbered the same - past a certain point, the new MOXF ones begin to be inserted, and therefore the XF and MOXF numbers don’t agree from that point on. |
pax_eterna
Total Posts: 209
Joined 11-03-2013 status: Enthusiast |
Cheers 5pin - good info to know :) |