Old Motifator threads are available in the Archive.
kmart
Total Posts: 87
Joined 09-25-2010 status: Experienced |
I am a newbie. I am following a video tutorial for my cubase software.
I don’t know if I need two midi cables or my Yamaha u16 cable to connect. I checked manuals and I don’t see guidance. I don’t even know if it’s “in” to “in” with the cable, or if I need two cables. I have the Yamaha u16 driver installed successfully but, it looks like the keyboard is supposed to be hooked up to the audiointerface. If that is true I need the midi cables. Do I need them both. It seems I need the u16 driver inside the pc and the midi cables to connect the keyboard to the interface. I’ve been away from this for a long time.Somebody help me out if you will. |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
First, you want to determine what you want to record to Cubase. MIDI or AUDIO or both. MIDI data can be transmitted from your MM6 directly to your computer via a USB connection (single USB cable) using the Yamaha USB-MIDI Driver. Go to http://download.yamaha.com
Select your country
You can refine the search to your particular computer operating system. You will find the Yamaha USB-MIDI Driver appropriate for use with the MM6 listed. Recording MIDI data means you are recording the coded messages that represent the music - you can document your performance and even edit the notes you played. The MIDI data is always played back through the MM6. It is able to read the coded messages and output sound. You connect the audio outputs of the MM6 to your monitor speakers (sound system) If you are going to be recording AUDIO to a computer, you then need to connect the audio outputs of the MM6 to your computer via a device called an “audio interface”. This device will be responsible for acting as your computer’s soundcard. You then connect your monitor speakers (sound system) to the audio interface device. The audio interface will take audio input and deliver it into the computer, it will take audio from the computer and route it to a pair of studio monitor speakers you connect to its audio outputs. In order to record audio you need an audio interface. Something like the Yamaha AudioGram3 or AudioGram6 - these are small format devices that allow you to connect your keyboard(s) and microphone(s) to your computer. The AudioGram will have a different driver - one that helps the computer process the Audio (sound) data. |
kmart
Total Posts: 87
Joined 09-25-2010 status: Experienced |
Thank you, I was able to figure out that I only needed
|