mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

newProducts [YOK]

rssFeeds [Syndicate]

Forum Home  >  Instruments  >  Motif XS  >  Thread

forumforum
Search  
  
  Advanced Search

Old Motifator threads are available in the Archive.

Viewing topic "Digital out on motif xs - volume too low ?"

     
Posted on: February 07, 2012 @ 02:39 AM
darkstar_outcast
Avatar
Total Posts:  245
Joined  02-20-2008
status: Enthusiast

For some reason, when I connect my xs to spdif of my maudio 1814 card, I have low volume of Motif ... ?

I know that volume slider is analog control,and that I can’t change level of sound with that control.

I used some cheap cable to make this connection, can that be problem?

What should I do?
Thanks
Regards

  [ Ignore ]  

Posted on: February 07, 2012 @ 03:32 AM
VikasSharma
Avatar
Total Posts:  1145
Joined  10-05-2010
status: Guru

Take a look at the following article by Bad_Mister:

MIDI Velocity and Audio Record Levels

Also, see the following threads:

http://www.motifator.com/index.php/forum/viewthread/452998
http://www.motifator.com/index.php/forum/viewthread/451685
http://www.motifator.com/index.php/forum/viewthread/456494

Hope that helps.

  [ Ignore ]  

Posted on: February 07, 2012 @ 03:47 AM
5pinDIN
Avatar
Total Posts:  1640
Joined  09-16-2010
status: Guru
darkstar_outcast - 07 February 2012 02:39 AM

For some reason, when I connect my xs to spdif of my maudio 1814 card, I have low volume of Motif ... ?

I know that volume slider is analog control,and that I can’t change level of sound with that control.

The DIGITAL OUT is taken just before the analog section, so anything that can affect level before that point will make a difference.

darkstar_outcast -

I used some cheap cable to make this connection, can that be problem?

No, as long as there are no dropouts or similar problems, the cable can’t be the cause. With digital, as long as the “ones and zeros” can be determined, the level of the converted analog signal isn’t affected.

  [ Ignore ]