mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

newProducts [YOK]

rssFeeds [Syndicate]


forumforum
 

Old Motifator threads are available in the Archive.

Viewing topic "Control one fader with volume pedal"

     
Posted on: February 06, 2012 @ 02:43 PM
daveybullets
Total Posts:  12
Joined  01-27-2012
status: Regular

Im just wondering if you can control the volume of just one part of a patch with a volume pedal. i.e bring up and down the volume of fader number 2

  [ Ignore ]  

Posted on: February 06, 2012 @ 02:55 PM
5pinDIN
Avatar
Total Posts:  11891
Joined  09-16-2010
status: Legend
daveybullets - 06 February 2012 02:43 PM

Im just wondering if you can control the volume of just one part of a patch with a volume pedal. i.e bring up and down the volume of fader number 2

Please tell us what you mean by “patch”. Are you in Voice mode, Performance, etc.?

  [ Ignore ]  

Posted on: February 06, 2012 @ 03:26 PM
daveybullets
Total Posts:  12
Joined  01-27-2012
status: Regular

Sorry I’m in perform mode. I have a piano with pads underneath and I want to control the volume of the pad with a volume pedal

  [ Ignore ]  

Posted on: February 06, 2012 @ 04:16 PM
Bad_Mister
Avatar
Total Posts:  36648
Joined  07-30-2002
status: Moderator

Yes. You can set the RECEIVE SWITCH for “EXPRESSION” to OFF for the PARTs that you do not want to respond to the pedal

From your PERFORMANCE
Press [EDIT]
Press buttons [1]-[4] to SELECT the PART you are editing
Press [F5] RCV SWITCH

Here you can activated or deactivate physical controllers for each PART as necessary. Since you want to control the PAD (leave EXPRESSSION checked for this PART, and clear the EXPRESSION box for the PIANO PART).

Now the piano will ignore the FC7 pedal

Press [STORE] to update your PERFORMANCE.

  [ Ignore ]  

Posted on: February 07, 2012 @ 03:48 PM
daveybullets
Total Posts:  12
Joined  01-27-2012
status: Regular

spot on.thanks for that

  [ Ignore ]  

Posted on: May 24, 2022 @ 12:24 PM
mas82
Total Posts:  11
Joined  10-12-2014
status: Regular

I have to bring that subject back on top because I need exactly the same behavior for my FC7: control volume for one part, leave the other part untouched.

I exactly followed the steps above and switched off the Foot Controller 1 where my FC7 pedal is plugged in but nothing happens. It still affects the volume.
Any help?

  [ Ignore ]  

Posted on: May 25, 2022 @ 04:08 PM
BeeRad
Total Posts:  118
Joined  10-17-2006
status: Pro

Fc1 controls total volume.  Plug the fc7 into foot controller 2 to assign it.

  [ Ignore ]  


 
     


Previous Topic:

‹‹ Wav drum loop slicing after the SONG mode how to use?
Next Topic:

    New OS ››