hi,
i have ES6 with PLG100 XG
I can not find a Brush GM drum kit
I do not understand how to select the sound bank from pmg100;
I can see all the internal sounds of the motif
thank you

The PLG100-XG is a 16-Part multi-timbral board, it never shows up in VOICE mode, you can only access it via the SONG or PATTERN (multi-timbral modes) as PARTS 17-32 of your mix. You can even address them via a separate MIDI PORT if you wish. Please see the following article:

PLG100-XG Multi-timbral Synthesizer Plug-In Module

(forget any url links in the article, it is about 10 years old)…

thanks! I read the link.
I realized that plg-100 is not paragonalibe to the internal sounds of the motif.
The sounds of the plg-100 are very amateur!
I decided to create a personal samplesr brushkit in motif.
I ask you something else, I need to get a multisample:
example:
URD
I want a key three samples playing a different velocity, Can be done?
I can not!!!
on E1, SD1 at 1 - 90; SD2 at 91 - 118; SD3 at 119 - 127
thank you

I realized that plg-100 is not paragonalibe to the internal sounds of the motif.
The sounds of the plg-100 are very amateur!

I disagree about the sounds being amatuer… sounds are sounds, musicians are professional or amatuer! You can make spectacular music with those sounds - the sounds themselves are not amatuer - its all about what you do with them.

I decided to create a personal samplesr brushkit in motif.
I ask you something else, I need to get a multisample:
example:
URD
I want a key three samples playing a different velocity, Can be done?
I can not!!!
on E1, SD1 at 1 - 90; SD2 at 91 - 118; SD3 at 119 - 127

Go to Voice mode
You can import (or sample) all waves to the same KEYBANK - say you want to place them on D1 (snare drum) - target the same note for all samples. You can stack as many as 127 samples on the same note (you could actually stack 128 but since only 127 of the velocities product results it would be meaningless to assign a sample a velocity of 0).

Although you can stack multiple samples on a single note, the unit can only sound 2 samples from a KEYBANK (2 samples is so it can accommodate stereo) - so this is why you must then map the RANGE of each sample so that no more than 2 of them share the same Note/Velocity RANGE. So the work comes in giving each sample a unique RANGE.

You then will have to set a Velocity RANGE for each sample
Press [INTEGRATED SAMPLING]
Press [EDIT]
Press [F1] KEYBANK
Select your WAVEFORM
Using the [SF1] AUDITION and [SF2] SELECT, you can toggle through the samples
Using the [F4] RANGE screen you can assign a unique Velocity Range for each selected sample.

It will require that you have a lot of patience, The [SF2] SELECT button will toggle through the different samples one after the other. Then the [F4] RANGE will allow you to set the Velocity Range for the currently “selected” sample.

Also see this post for more discussion on the same topic:
http://www.motifator.com/index.php/archive/viewthread/96762/