I have a Motif XS. I need a way to control my voices on stages while playing.
What can I do with the MFC 10 controller?

In preformance mode:
Is it possible to select an other user performance?
Is it possible to control the Performance control, like part select, part mute and the solo button?
Is it possible to switch AF1&2;?

Is it possible to assign program change (for example CC11) to only one part (for example part3: part 3 changes and part 1,2,4 doesn’t change)?

In pattern/ song mode or Mixing mode:
Is it possible to select an other voice?
Switch directly from voice 1 to 8, from 8 to 4, from 4 to 1 etc.

In any case you must press a button or kick a pedal.
Now, some guys/dolls can play with 2 hands and 2 feet.
Soon I found out I can’t; I wonder who can.
You may not like my ‘solution’ but the pro’s just add a few
keyboards; SAGA plays with a stack of 8 (eight!) Korgs.
Of course you won’t, but even adding an MM6 (650 box) is a relief.

;JOOP!

Someone knows the answer to my question??… Maybe BadMister

In preformance mode:
Is it possible to select an other user performance?

If you are in PERFORMANCE mode, yes it is possible to select another PERFORMANCE

Is it possible to control the Performance control, like part select, part mute and the solo button?

No. These are selected by dedicated front panel buttons on the keyboard itself.

Is it possible to switch AF1&2;?

Yes.

Is it possible to assign program change (for example CC11) to only one part (for example part3: part 3 changes and part 1,2,4 doesn’t change)?

cc11 is not a Program Change message… it is a CONTROL CHANGE message. Yes this can be done with an MFC10, however, this can be done without the MFC10 using an FC7 pedal plugged into the Foot Controller jack.

In pattern/ song mode or Mixing mode:
Is it possible to select an other voice?
Switch directly from voice 1 to 8, from 8 to 4, from 4 to 1 etc.

Not sure what you mean here. If you mean switch from PART 1 to PART 8, NO. That would be changing the keyboard Transmit channel. This is handled by the front panel buttons [1]-[16]

If you mean can you send a Program Change from a button on the MFC10 to a PART, YES. Any of the switches on the MFC10 can be set to send any Bank Select/Program Change on any MIDI channel.

Thanks again BadMister, for all the answers and great support!!!

Thanks again BadMister, for all the answers and great support!!!

Just one question,
How can I control the AF1&2;functions with a midi controller like MFC 10? Do I have to program this?
Can this also be done with a cheaper footcontroller?