Old Motifator threads are available in the Archive.
motif8mine
Total Posts: 1743
Joined 10-22-2004 status: Guru |
So, where can this info be found? |
motif8mine
Total Posts: 1743
Joined 10-22-2004 status: Guru |
So, er.. ah… I guess there wasn’t one? |
Yamaha_US
Total Posts: 2540
Joined 07-19-2002 status: Moderator |
We want to do accurate testing of all the variables which will take some time. There are a number of new functions for loading depending on use case. Here is the simple answer.
Loading data to the SRAM in the XF is at the same speed as loading data to the RAM in Motif XS. Everyone here has an idea of how long loading 128 MB takes (about a minute) and that info is already available on the site.
Once the samples are installed on the board loading programs that access the Flash waves takes no more time than a file accessing just ROM waves because there is a new function in the XF that loads just the parameters without loading any wave data so an All file accessing 2 GB of Flash loads in about 10 seconds. |
motif8mine
Total Posts: 1743
Joined 10-22-2004 status: Guru |
Yamaha_US, thanks as always… |
radore
Total Posts: 102
Joined 08-23-2008 status: Pro |
1.
2.
So in Europe it takes 20 minutes for 512 MB but in USA it takes 20 minutes for 1GB. We are so screwed here in Europe. Just joking guys. Ok seriously how long does it take to load 1GB , 20 minutes or 40 minutes? |
Yamaha_US
Total Posts: 2540
Joined 07-19-2002 status: Moderator |
Sorry, it was late when we posted. The 2.4 MB per seconds sounds correct. So that is 2400 seconds for 1GB or 40 minutes. Just enough time for lunch ! |
radore
Total Posts: 102
Joined 08-23-2008 status: Pro |
Thank you! |