I am making a performance with piano and synth and I’m wondering if there’s a way that I can use the damper pedal for the piano part in performance mode. Also When I have an organ in performance mode, is there any way to use the draw bars?

Any help is appreciated. Thanks

When in PERFORMANCE mode you can choose what controllers are active for each PART
Press [EDIT]
Press the Track button [1]-[4] that corresponds to the PARTS 1-4 to view the PART’s Edit parameters
Press [F6] RCV SWITCH (Receive Switch)

You can view all 4 PARTS at once by pressing the [SF5] 4 PART button - each PART will have its controllers listed vertically.

Simply activate (red check) or deactivate (remove check) for each Controller. So if you do not want the sustain pedal for a particular PART you can deactivate it by removing the check mark for the corresponding PART.

you can isolate Parts by pressing the [SOLO] button, then using buttons 1, 2, 3 and 4 to isolate just that PART.

Actually, the Motif XS does not have drawbars, at all. If you mean can you use the CS (Control Sliders) as individual Element Level controls while in PERFORMANCE mode, the answer is: No

Access to individual Element Levels is a function of VOICE mode.
The CS act as PART VOLUME when you are in PERFORMANCE mode.