Old Motifator threads are available in the Archive.
tortoise
Total Posts: 16
Joined 07-24-2004 status: Regular |
I am looking for a driver that I hope will allow me to use my XS8 with USB connected to my computer and recording with Audacity. For example I can use a headset from Logitech with USB and in the control panel change default device to Logitech’s diver and the mic will record in Audacity. Is there a driver that will allow me to do that with my Motif? I tried downloading one USB driver but it said to first connect a device compatible with Yamaha USB Audio Driver. I don’t know what that is. Has anyone tried to use Audacity to record the Motif? |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
A device compatible with Yamaha USB AUDIO Driver would be a device capable of outputting audio via USB. These include Yamaha devices like the AudioGram3 and AudioGram6, and small format mixers. not the synthesizers. The Yamaha synthesizers use the Yamaha USB-MIDI Driver for multiple port MIDI communication. The Motif XS8 is MIDI only via USB. The XS8 is able to send both audio and MIDI via Firewire. Firewire’s robust bandwidth allows (using the Yamaha Steinberg Firewire Driver) the XS8 to output 16 audio channels and return 3 pairs of stereo audio and at the same time communicate with the computer in two directions with 4 simultaneous MIDI Ports. If your computer has a firewire port, then all you need to do is download the Yamaha Steinberg Firewire (YSFW) driver for your computer type. This will allow you (if your software can use ASIO drivers) to receive up to 16 audio outputs from your Motif XS8. And as mentioned this will also handle MIDI for you to and from the computer as well. Nothing else to buy - just get a single firewire cable connect your XS8 and your in… |
tortoise
Total Posts: 16
Joined 07-24-2004 status: Regular |
Thank you for you fast reply. I have an old G4 Mac PowerBook with Fire Wire, but this computer is almost dead. The power connection is breaking and it will cost too much to fix. My Dell Laptop does not have Fire Wire. I currently have an old USB Midisport 2X2 by Midiman that I used a long time ago with Allegro and another keyboard with midi ports. Is there any possibility here? I have a very simply project that I just need to play 1 track that will provide background sound to a voice message. I actually also have an Mbox with Protools but again I use to use that on my Mac which is about dead. Can I use my Mbox? Or is that just dedicated to Protools? |
Dreamflight
Total Posts: 2688
Joined 03-07-2008 status: Guru |
No, as Bad_Mister said the XS cannot send or receive audio to a host computer via USB, it’s MIDI only. If this is a one off project then you can record your backing sequence into the XS sequencer and then use the direct to USB recording feature to save a WAV file of the backing onto a USB storage device. You can then import this WAV file into Audacity and add whatever extra material you need in there from a mic or whatever. Df. |
tortoise
Total Posts: 16
Joined 07-24-2004 status: Regular |
That sounds like a great simple solution. I will have to read my manual to find out how to save a WAV file to a USB storage device. Once I get that then if WMplayer can play it, Audacity can just record it and/or import it. I’ll be back if I can’t figure out how to save a WAV file. Thanks again for easy solution. |