Old Motifator threads are available in the Archive.
tdwctdwc
Total Posts: 79
Joined 04-09-2009 status: Experienced |
Greetings.
I’m currently using my motif classic as a monitor while mixing with my DAW.
What i’d like to know is : What should i set the A/D input level knob to? middle, maximum, etc...? Also the output gain in the utility I/O settings, should it be on 0db or +6db or +12db ? I just need a good overall level setting that will let me monitor things well.
Thanks.
R. |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
Just set it by ear. If you hear distortion, reduce the input level until it goes away. I’d use 0 dB unless you can’t get enough volume even with the input level knob at maximum. |
tdwctdwc
Total Posts: 79
Joined 04-09-2009 status: Experienced |
yep, understood.
R . |
kenta
Total Posts: 1
Joined 10-23-2009 status: Newcomer |
I was gonna ask the same thing so thanks for this thread. It’s very helpful.
Regards,
|