I´ve worked on the soprano voice a bit ... this time recorded live in one take ...

Weather Reload2.mp3  (File Size: 6194KB - Downloads: 116)

Not bad for one take - I only heard 1 stutter step.
thanks for sharing your work....

Aneider,

yeah you are right. I did use the wrong word. It is the lag of expression in the soprano. Maybe when you use the tone wheel to give some expression to the sound. I know it is very difficult.

I agree you should do something on the melody as well.

The WX5 should work fine with the VL board. I used the WX7 with it, long time ago (with the MOTIF ES8) and it worked very well, if you use the BC controlled voices.

Jan

jan bruijn - 02 July 2009 01:58 AM

The WX5 should work fine with the VL board. I used the WX7 with it, long time ago (with the MOTIF ES8) and it worked very well, if you use the BC controlled voices.

Jan

Where do you connect a WX-controller to your ES? I only have a connection for the BC on my CS6x and I don´t see any WX-connector on the ES8 in the manual.

Aneider,

I think I used the midi out of the WX7 into the midi IN of the ES8 and selected the BC voices of the VL board.

However, I am not 100 percent sure about. Almost I do.

Jan

jan bruijn - 02 July 2009 05:01 AM

I think I used the midi out of the WX7 into the midi IN of the ES8 and selected the BC voices of the VL board.
Jan

You´re right, you can connect the WX via midi out to the CS6 or ES8 Midi-in.
I will look out for a WX5 on ebay ...