mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

newProducts [YOK]

rssFeeds [Syndicate]

Forum Home  >  Instruments  >  Motif-Rack ES  >  Thread

forumforum
Search  
  
  Advanced Search

Old Motifator threads are available in the Archive.

Viewing topic "Question about using the Multi + MPC 2000xl"

     
Posted on: June 27, 2009 @ 10:40 PM
reezy510
Total Posts:  1
Joined  06-27-2009
status: Newcomer

Ok here is what I am working with:

Yamaha Motif Rack ES
MPC 2000xl
Midiman Oxy61

My setup is connected like so: Oxy 61 Midi Out -> MPC Midi IN, MPC Midi OUT-> Motif Rack Midi IN

What I have been doing is using the Rack in Multi Mode, and then sequence all my instruments on the MPC. This is where I have a question: When I want to save a beat I save all Sequences & Songs, and All PGMS on the MPC, and then I have to save the Multi Program on the Motif rack. PROBLEM IS- I am running out of rewritable Multi programs on the rack. I thought I could midi dump the Multi information on the MPC, which saves all the instruments/midi channels etc. Is there a way to do this? Am I doing this the hard way?

Any advice is truly appreciated.

  [ Ignore ]  

Posted on: June 29, 2009 @ 12:54 PM
Bad_Mister
Avatar
Total Posts:  36620
Joined  07-30-2002
status: Moderator

The Motif-Rack ES can Bulk Dump its MULTI setup as follows:
From MULTI mode
Press [UTILITY]
PAGE [>] to the last page [JOB SEL]
Select BULK DUMP
Press [ENTER]
Mark the item “Current 1 Multi”
Press [ENTER] twice…

This will send every parameter of the current Multi OUT via MIDI where you can store it in an external device set to record MIDI system exclusive data.

  [ Ignore ]