Old Motifator threads are available in the Archive.
Sérgio Ricardo
Total Posts: 47
Joined 10-08-2006 status: Regular |
I managed to configure my m-audio midair to control some parameters as: reverb depht, chorus depht, modulation, volume, arppegio, cutoff, attack, ressonance and portamento.
thanks!! |
TonyPhillips
Total Posts: 844
Joined 09-16-2005 status: Guru |
Well, I don’t know exactly what the MidAir can SEND, but in general, all that you describe is POSSIBLE with outboard controllers that are capable of sending the appropriate MIDI commands… I don’t know if you can change BANK alone (without also changing the current PATCH), unless you use SysEx commands, but that should be possible, too. To change the things you’ve had success with, you’re sending MIDI controller info. To do the things you WANT to do, you send MIDI controller info. So, you’re pretty much there; just look in the MOTIF MIDI implementation and DATA guides to see what values do what you want to do. |
michaelcapp
Total Posts: 8
Joined 06-06-2009 status: Newcomer |
can u change the volumn of different parts in the perform mode? if yes, how so you do it ? would you please giv eme a hand? thanks |
TonyPhillips
Total Posts: 844
Joined 09-16-2005 status: Guru |
No, you can’t without detailed SysEx messages. You CAN do that via a MULTI, but not a PERFORMANCE. |