Old Motifator threads are available in the Archive.
Acalinei
Total Posts: 15
Joined 01-25-2020 status: Regular |
Can you please help me to connect my Motif XS6 to a laptop? I have alredy tried doing it with a cable like those used for printers, but it didn’t work. I am trying to connect it to the laptop in order to be able to use an editing program,named John Melas.
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
The cable should connect from the XS “TO HOST” port to the USB port on the laptop. The correct USB-MIDI Driver is required. Since you didn’t tell us whether your laptop is a Mac or Windows machine, and which OS is installed on it, we can’t point you to the specific driver.
Check here:
|
Acalinei
Total Posts: 15
Joined 01-25-2020 status: Regular |
yes i did connection via host- usb sibam triedbw two different cables, but it gives me the same message, Motif XS6 is not connected. I installed Windows 10 on the laptop. Multumesc. |
Acalinei
Total Posts: 15
Joined 01-25-2020 status: Regular |
Wat driver its god? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Driver for Windows 10 32-bit:
Driver for Windows 10 64-bit:
Make sure you STORE the Utility mode MIDI In/Out “USB” setting. After the proper driver is installed, run Setup for the Melas software.
An example of what should result…
|
Acalinei
Total Posts: 15
Joined 01-25-2020 status: Regular |
Multumesc mult! Apreciez.... |
Acalinei
Total Posts: 15
Joined 01-25-2020 status: Regular |
Hello. What is the latest operating system version for xs 6 pattern? Do you know something will be updated soon? I saw that the montage and modx were done ... |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
The most recent OS (firmware) for the Motif XS is version 1.60. It’s almost 10 years old. I don’t expect Yamaha to be issuing any further updates. |