Old Motifator threads are available in the Archive.
tradivoro
Total Posts: 45
Joined 12-16-2003 status: Regular |
I’ve researched the manual and forum and found out the sample rate and how to maximize the output from the motif xs. I just need to know, is the motif xs automatically set to internal clock when using the spdif out? Reason I ask is that the focusrite device (which I am considering buying) says “to record via spdif, make sure that the external device is set to its internal clock.” Any info appreciated, thanks. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
S/PDIF is self-clocking - the clock is integrated into the data stream along with the digital audio. The signal at the DIGITAL OUT connector of the XS is S/PDIF, 44.1kHz/24-bit. The receiving device input should be set to that sample rate and bit depth. If a receiver is incapable of 24-bit depth then the less significant bits can be ignored if necessary. Red Book audio (CDs) is 44.1kHz/16-bit. |
tradivoro
Total Posts: 45
Joined 12-16-2003 status: Regular |
Thanks 5pin. The focusrite definitely has that sample rate, so that’s not a problem. Glad to know that if in the match it doesn’t have 24 bit, that it’s not the end of the world. I imagine that the maximum output of the motif xs is probably going to be about -12db, which is the same that I was able to get out of the moxf8 from the usb digital out of the machine. However, I found that any more than that and it started to distort in Sonar, which was strange. -12db to -18db sounded nice and clear. So, 0db is not the end all be all with these instruments. Thanks again. As usual, you’re a wealth of information. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome.
Â
The DIGITAL OUT signal is the same as what’s available at the main analog outputs (L/MONO and R), but before it goes through D/A converters, etc. Therefore the level is set in the same manner as for analog, except that the MASTER VOLUME slider (which is an analog control) will have no effect on the digital signal.
Â
By “0dB” I presume you’re referring to the digital level 0dBFS. (For those not familiar with that terminology, see links from http://www.google.com/search?q=0dbFS)
|
tradivoro
Total Posts: 45
Joined 12-16-2003 status: Regular |
I was able to get the moxf8 to 0db but it definitely sounded distorted at that point. Between -12 and -18 it sounded good and I could get it to 0 for mix purposes with the gain in Sonar. At that time, the moxf8 was doing the digital recording heavy lifting via usb. However, since the Motif XS doesn’t have the digital recording capability out of the box (via usb, it seems that firewire was an option once, but you can’t get the interfaces anymore) spdif is the way I’m going, so I’m exploring possibly the focusrite as an interface that can record spdif. Regular recording out of audio outs sounds pretty good, but I compared digital recording and audio recording with the moxf and digital recording sounds like an exact replica whereas the audio recording always has a slight coloration and tonal difference largely due to going through the mixer. The digital sounds better. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
The XS6 and XS7 can use either an mLAN16E2 or FW16E FireWire interface. If you want to get one, check online auction sites, they do show up for sale from time to time. |
philwoodmusic
Total Posts: 1055
Joined 07-01-2013 status: Guru |
Hi tradivoro, Instruments should be recorded with a good 12 - 15 dB of headroom so that there’s room to manoeuvre when you layer them together in your mix. It’s not necessary to record everything near to 0dB, otherwise you can quickly run out of headroom in your DAW. Motifs are perfectly capable of giving you a really loud output, if that’s what you want. You can do this with any VOICE, but if you edit (for example) a piano in Voice Mode first, increase its volume (which I guarantee will be set moderately or conservatively by default) save that edited piano to a USER location, and then use that in the sequencer modes, or just in voice mode as it is, you’ll get a much louder output. That should always be your first step to getting much more level out of your Motif. The reason why voices are set lower than you expect, is because Yamaha expect us to layer them together or stack them against another 15 voices in Song Mode. If every voice was maxed out, we’d all be distorting our outputs quickly and easily when we layer them. That is just the same thing as my first paragraph, but on the Motif itself. By aiming to get everything at 0dB, you’re aiming for the same problem in your DAW. |
tradivoro
Total Posts: 45
Joined 12-16-2003 status: Regular |
I’ve looked around and unfortunately, everybody is price gouging these at the present. For the money they’re charging, I think it’s better to get a new audio interface that has spdif recording capabilities that you can also use to record other sources as well. Maybe at some point I’ll find an FW16E at a good price and pick it up. As an aside, considering that the motifs are expensive machines when they were new, I don’t understand why Yamaha didn’t just have the firewire interface as stock with the xs6 and xs7, not just add it to the 88 note version of the synth. But it’s water under the bridge now. |
tradivoro
Total Posts: 45
Joined 12-16-2003 status: Regular |
Hi Phil, you have verified my suspicions. When it got that hot, I figured they were thinking that when you started to mix various sounds, things were going to get distorted real fast, unless you recorded it at a lower level. Funny thing is that it sounded fine level wise at that level, louder than you would have expected. Thanks for the detailed info. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
I’m curious - what pricing are you seeing, and what would you consider a reasonable price to pay?
Â
The 88-key XS8 was the top-of-the-line Motif model, and went for a premium price, so perhaps it isn’t surprising that it included the built-in mLAN interface. Not that I’m trying to defend Yamaha, but not everyone wanted/needed mLAN, so making it optional allowed them to offer the XS6 and XS7 at a somewhat reduced pricing. What’s unfortunate is that Yamaha apparently didn’t foresee future demand for the interface, or care enough about Motif XS/XF users to keep some inventory available. |
tradivoro
Total Posts: 45
Joined 12-16-2003 status: Regular |
Well the prices I’ve been seeing for used units out there have ranged from $300 to $500. It’s crazy. I’d rather just get a new audio interface with spdif recording. I never updated my audio interface, since I mostly used vst synths and kontakt and that got rendered to track. so this would be a good excuse to get a new one. If I came across a FW16E unit for $150 or so used, I’d go for it. Inasmuch as I know that will have more versatility than one track at a time spdif, with the generic audio interface I could also record vocals and things like that as well. (I know you can technically do this with the motif as well, but I still think of it as a keyboard.) The focusrite seems to be a good unit. I’m also looking at some usb 3 units out there and see if there any good. In the meantime, I’m very pleased with the XS7. It works as a great controller, the design and layout is great. The sounds are great. Also, it’s not charcoal, black or another dark color. It’s a nice light green, easy to see everything. And most importantly, the keybed is not killing my hands, like the moxf8, which was my original motivation for getting it. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
The FW16E when new listed for US$299.95, and was sometimes discounted to about $269. Considering their current rarity, a used one that’s known to be functional selling for $300 actually doesn’t seem to be unreasonable. Some users might be willing to pay more.
Â
I’d be surprised to see one at that price unless the seller was unaware of the market for them at this time. I’ve occasionally seen a Rack XS with an FW16E installed selling for as little as $850. At that price, anyone desperate for the FW16E could purchase the Rack unit, remove the FW16E, and probably resell the Rack XS for almost what they paid. It might be worth the hassle to some. |
tradivoro
Total Posts: 45
Joined 12-16-2003 status: Regular |
Well, not knowing what these things cost originally, I see why they’re going for that price. I am definitely going to focus on the audio interface unit, it’s not worth it to invest in something that’s only going to work on a xs7. At $300 dollars I could pick up a used mx49 which comes with an audio interface. No, I think I’m going to stick with the spdif route. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
I’m not trying to convince you otherwise, and I have no horse in the race. However, please understand that these threads are read by many others besides yourself. For those wondering, there’s an advantage to the FireWire interfaces that’s not usually mentioned - speed. When using the Yamaha Editor, for example, data transfers are significantly faster over FW than USB. Enjoy your XS. Although my XF6 has an FW16E, I’ve used my XS6 for several years without FW, so it’s certainly not a necessity. |
tradivoro
Total Posts: 45
Joined 12-16-2003 status: Regular |
Oh believe me, I understand completely that these posts are meant to educate others in the future who may find themselves in the same position, and show that there are options and that even if you go the interface route, you get these benefits as a result. So, I understand perfectly. I’m sure that this is a subject that perhaps is not spoken much about, in the light of the time that has passed since this keyboard was issued, and people should know, hey you have this option available to you. In a perfect world, I would have gotten a montage 7, but I could not afford that, and I got this for a third of the price, it gave me a keyboard I could play hand wise, with sounds that I’m familiar with. I’ve been working with Yamaha sounds off and on for about 30 years and I definitely have Yamaha on the brain. The other synths, Roland, Korgs, have nice sounds, but Yamaha always feels like home to me. I still have a TX802 from back in the day, which I keep for sentimental reasons. :) Only because I couldn’t keep the DX1, the TX816 and the QX1. There was no room. So yes, me and Yamaha go back a long way. |