Old Motifator threads are available in the Archive.
sammyhunk
Total Posts: 23
Joined 10-07-2013 status: Regular |
Hey awesome forum, I just bought and installed a 1024 MB flash module onto my Xf6. I formatted it in UTILITY but when I shut off the motif and turn it on again it says unformatted module detected and asks me to format again. This keeps happening. Also (maybe related) when I am trying to load the inspiration in a flash content onto the board using TYPE ALL no waveforms get saved onto the module and I cannot hear most of the new voices. I only have one flash module and have installed it in FL2. Not sure if that’s the issue… HELP??? Samik. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
There could be a simple explanation. The following is from one of my previous posts:
See http://www.motifator.com/index.php?ACT=39&fid=161&aid=14978_PgVaxXCcGUsXGlsDXz0b
Â
Most sample libraries default to installing the Waveforms to FL1. Since you have only one flash module, I suggest that you move it to the FL1 position, install it carefully as described above, and see if the problems are resolved. |
sammyhunk
Total Posts: 23
Joined 10-07-2013 status: Regular |
Thanks 5PinDIn. You da man! I did both - re-installed in FL1 and pushed the contacts firmly. Not sure what was the problem before, but it works beautifully now - have been able to install the entire “Inspiration in a Flash” premium content, and having a blast!!! :)
Cheers!
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome - I’m glad that worked. In my experience problems are usually with the installation - the flash modules themselves are typically reliable. |