Old Motifator threads are available in the Archive.
mkeschinger
Total Posts: 73
Joined 10-25-2011 status: Experienced |
Hi Gang,
MK |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
See http://www.motifator.com/index.php/forum/viewthread/473257/
Also see…
In addition, the “Put Track to Arpeggio” sequencer Job could be used to create your own User Arp. |
mkeschinger
Total Posts: 73
Joined 10-25-2011 status: Experienced |
Thank you! I will try them!
MK |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome.
Â
Unfortunately, the descriptions you’re specifically asking for aren’t available. Perhaps auditioning the Arps in the Seq > Genrl category will help. Here’s a way to do that…
1) Select a blank/initialized Song
Step 11 determines whether keys need to be held down to hear the entire Arp. Step 12 ensures that a Voice appropriate for the Arp Type is selected - other Voices could be chosen, if desired. Arp looping can be turned on/off via the [F3](ARP Other) Loop setting. Note that with Voice with ARP “on”, some Arps can sound quite different than with it “off” and a different Voice selected. For example, with Voice with ARP “on” the Type 7454 and 7455 ones use “PRE 6:119 Freaky Loop”, sounding unlike what they would with a simple piano Voice. Depending on the Voice you choose, for a repeated note you might want to stick with Types 7386 or 7390. |
mkeschinger
Total Posts: 73
Joined 10-25-2011 status: Experienced |
Ok.think i have one set up.Now i just need to figure out why it cuts out. I have it on a split and when i go to certain notes out of the split it kills the arp hold in the area that has the sound and the arp. I have a bass sound goingg up to b1 with an arp. When i hit the c or the d above that, it cuts out. :( |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
There’s a Part Note Limit for both the Voice and the Arp. It seems that you set the Voice upper Note Limit to B1 for the split, but did you set the Arp one similarly? In Part Edit mode, press [F2](ARP Main) and check the upper Note Limit setting, which should be B1. |
mkeschinger
Total Posts: 73
Joined 10-25-2011 status: Experienced |
Didn’t know they were separate. I will check that tonight. Figured If I applied an arp to a particular sound, it would be set within the limits of the sound. :)
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome! |
mkeschinger
Total Posts: 73
Joined 10-25-2011 status: Experienced |
Ok, i give. I can’t find the arp main you mentioned in my performance. I can set the limit for the voice. Not the arp. I can change the arp, type, etc. but not the key limit. Dove back into the manual for adjusting arps in a perfomance and it doesn’t show it either..:( |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
From Performance Play mode…
(For Parts in Songs or Patterns, this can be done similarly from Mixing mode. Select Part [1]~[16].)
Â
See (5) Note Limit on page 112 of the XF Reference Manual (http://download.yamaha.com/file/48531). |
mkeschinger
Total Posts: 73
Joined 10-25-2011 status: Experienced |
Wow.. never would have found that one on my own…
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Deeper, indeed. I’m glad we got that resolved.
|
mkeschinger
Total Posts: 73
Joined 10-25-2011 status: Experienced |
Yep- trying to get that time in between work, a sore throat and a new 3yr old dog.... Plan is tonight though. Be on the look out. There may be a flurry of questions. ;)
MK |