mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

newProducts [YOK]

rssFeeds [Syndicate]

Forum Home  >  Instruments  >  MOXF  >  Thread

forumforum
Search  
  
  Advanced Search

Old Motifator threads are available in the Archive.

Viewing topic "MOXF SysEx to alter between Song Parts"

     
Posted on: September 22, 2018 @ 12:51 AM
CologneKeys
Total Posts:  24
Joined  03-01-2014
status: Regular

Hi folks,

with the help of this forum I learned that changing modes in the MOXF works with these SysEx commands:

F0 43 10 7F 1C 00 0A 00 01 00 F7 // Voice
F0 43 10 7F 1C 00 0A 00 01 01 F7 // Performance
F0 43 10 7F 1C 00 0A 00 01 02 F7 // Pattern
F0 43 10 7F 1C 00 0A 00 01 03 F7 // Song
F0 43 10 7F 1C 00 0A 00 01 04 F7 // Master

Playing live I always use the song mode, organized like this:

PART 1 - MIDI CH 1 - PIANOS
PART 2 - MIDI CH 2 - E-PIANOS
PART 3 - MIDI CH 3 - ORGAN
PART 4 - MIDI CH 4 - STRINGS
etc.

Is it possible to alter between parts via SysEx or MIDI commands (just to avoid to press the part buttons manually)?

Is it furthermore possible to change the voice within the part (e.g. PART 1, CH 1, Full Concert Grand to Natural Piano) via SysEx or MIDI?

Best regards from Cologne

Christoph

  [ Ignore ]  

Posted on: September 23, 2018 @ 01:22 PM
5pinDIN
Avatar
Total Posts:  11891
Joined  09-16-2010
status: Legend

To start with, see http://www.motifator.com/index.php/forum/viewthread/478909/

The SysEx messages in that thread are for the MOX, but could be changed for the MOXF. The Model ID (fifth byte) is “14” for the MOX - that should be changed to “1C 00” (two bytes) for the MOXF.

  [ Ignore ]  

Posted on: September 25, 2018 @ 12:59 AM
CologneKeys
Total Posts:  24
Joined  03-01-2014
status: Regular

Thank you very much!

Regards from Cologne

Christoph

  [ Ignore ]  


 
     

Previous Topic:

‹‹ Finally starting to use my MOXF, question though Next Topic:

    Moxf8 and FL Studio ??? ››