Hello,

I assigned some voices in master mode from 1 - 16 for my convenience..

for example:
A1 for piano
A2 for strings
A3 for flute
etc.,

i changed from strings to flute while playing.. i can’t hear the phrase completely when changing voice.. there is a small break occured..

Any way to solve this issue?

Thank you..

velmurugan - 26 December 2017 10:48 AM

Any way to solve this issue?

Yes - don’t use Master mode for that purpose.

See http://www.motifator.com/index.php/support/view/using_a_moxf_mixing_program_for_quick_access_to_multiple_sounds_in_a_live_s

Thank you 5pinDin..

but i am unhappy with that.. because, i have created 4 layer strings..  only able to play in performance mode.. can’t mix in song or pattern mode.. so i am supposed to use strings from voice..

Another doubt..

i can’t able to turn on insertion effect from 9 to 16 in mixing..
only able to do with 1 to 8 tracks..
is there a way to turn on?

thank you..

http://www.motifator.com/index.php/support/view/using_a_moxf_mixing_program_for_quick_access_to_multiple_sounds_in_a_live_s

i read the above article..

i am cleared now..

velmurugan - 26 December 2017 12:44 PM

Thank you 5pinDin..

You’re welcome.

 

velmurugan -

but i am unhappy with that.. because, i have created 4 layer strings..  only able to play in performance mode.. can’t mix in song or pattern mode.. so i am supposed to use strings from voice..

There are limitations, and compromises sometimes are necessary.

However, you can certainly create layers in Song or Pattern Mixings.

See:
http://www.motifator.com/index.php/forum/viewthread/478693/
http://www.motifator.com/index.php/forum/viewthread/478192/
http://www.motifator.com/index.php/forum/viewthread/478070/

 

velmurugan -

Another doubt..

i can’t able to turn on insertion effect from 9 to 16 in mixing..
only able to do with 1 to 8 tracks..
is there a way to turn on?

From the article I previously linked to:
”On the MOXF EFFECT > [SF2] Ins Sw (Insert Switch) screen you can quickly view the PARTS which are recalling their dual Insertion Effects from Voice mode. The mark on the “Ins Sw” row indicates active processors. A maximum of eight PARTS can recall their dual INSERTION EFFECTS, which means any eight including any of synth PARTS plus the A/D INPUT Part can all have two INSERTION EFFECTs a piece. You must setup each MIXING program to optimize it for each stage performance. You can setup the System Effects for each. In the example below you can see you can make this work.”

If you need Insert Effects on for some of the Parts 9-16, first turn some off for Parts 1-8.

Super 5pinDIN.. thanks a lot..

velmurugan - 26 December 2017 02:10 PM

Super 5pinDIN.. thanks a lot..

No problem - I’m glad to help.