Old Motifator threads are available in the Archive.
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Hi guys I am in big problem! Please help..
I am getting message on MOXF 6 - “Unrecognized Flash memory module please format that” after installing Flash memory module which I was using it and programmed on MOTIf XF..!!!
Please help ASAP .. Tomorrow I have show and I am stuck now.. Many thanks in advance.. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
What is happening is normal. You can’t transfer a Motif XF formatted flash module into a MOXF and expect to access data on it. The format for the Motif XF is different than that for the MOXF. If you must use the MOXF rather than the Motif XF… Unless you’ve already saved an “All” file “with sample” on the Motif XF, you should put the module back in the XF and save that .X3A file. You could then move the flash module to the MOXF, format it, and load the .X3A file with sample. When done with the show, you could move the flash module back to the Motif XF, format it, and load the .X3A file with sample again. Obviously, having a flash module in both models would make things much easier. By the way, compatibility between the XF and MOXF has limitations. For what will transfer from a .X3A file, see http://www.motifator.com/index.php/forum/viewthread/478546/ |
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Ohhhh....:(
Thank you very much for valuable help as always ..Really appreciate it. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
As you now understand, sequencer data isn’t directly compatible between the two models. To transfer Song/Pattern data, including Mixings, requires some effort, but it can be done. See http://www.motifator.com/index.php/forum/viewthread/477834
Â
You’re very welcome. |
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Thank you very much ..
|
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
I really want to thank you all and especially 5pinDIN. Finally I have programmed and sample all my sounds in Motif XF with the help of great John Mela’s Waveform editor software also successfully transferred all my sounds to MOXF from Motif XF (again with help of amazing John Mela’s Total Librarian software). I couldn’t have done this faster without help of this great forum and specially 5pinDIN and John Mela software.. Thank you all..
Last question/ issue- In one of my Santur (Indian hammered dulcimer)I have used Trill arpeggiator which triggered by higher velocity. It is working perfect in VOICE but when I am using it in SONG MODE arpeggiator is not working(in MOXF). I checked every parameters and all looks exactly same.. !
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
I’m glad to help when I can, and I’m sure others who participate here feel the same way.
Â
Please be more specific - exactly what does “is not working(in MOXF)” mean? Does the Arp not trigger at all, or not at the desired velocity, or is it not the correct Arp, or something else? |
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Please be more specific - exactly what does “is not working(in MOXF)” mean? Does the Arp not trigger at all, or not at the desired velocity, or is it not the correct Arp, or something else?
It not getting triggered… ! Generally in VOICE mode when I play note with higher velocity it triggers trill Arp but in Song mode it doesn’t trigger in song mode when I play with higher velocity. Thank you |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Things to check…
2) Verify that the default Arp number is the same in Voice mode and the Song Part. I don’t know what the MOXF does - with the XF, copied Arps default to Arp1, no matter which Arp is the default in the Voice it was copied from, and the correct Arp has to be manually selected and then the Mix stored. If the above doesn’t solve the problem, perhaps you could attach a zipped “All Song” .X6S file. Maybe somebody could look over your Mix - I would do it, but unfortunately I don’t have a way of displaying that MOXF data. |
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Thank you 5pinDIN.. Let me work on it on what you have advised me ! |