Old Motifator threads are available in the Archive.
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Hi Guys Thank you all for your previous help ! Here is new problem I have if anyone have solution for this please help me out..!
I have Motif XF (and planning to buy MOXF soon). I am programming and creating live set in song mode to play VOICES seamlessly live in shows. I need at least 17 VOICES with only one switching and should change seamlessly… ! Can anyone help me how to achieve this?
Can I use ‘SCENE’ in any way to get different sound set? Thank you.. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
There’s no magical way to have more than 16 Parts in a Song/Pattern Mixing. However, it is possible to have more than one sound across the entire keyboard in a Part, if you have Elements to spare in a Voice. I’ve attached a demo “all voice” file, zipped. The first two User1 Voices (A01 and A02) are the demos, the rest are initialized. The approach I took in A01 (3way AF1 AF2 5pinDIN) uses XA Control, in conjunction with the “all AF off”, “AF1 on”, and “AF2 on” settings. With neither AF button depressed there’s a piano. Pressing AF1 replaces the piano with a cello. Turning off AF1 and pressing AF2 gives you a sax. If both AF1 and AF2 are on, the cello and sax are layered. All three sounds will play across the full C -2 to G8 range. If switching between only two sounds was desired, programming for AF2 could be eliminated. For A02 (MW x-Fade 5pinDIN) I did a cross-fade using the Mod Wheel, via Controller Set Assignment. An organ sound is played with the MW all the way down. As the MW is advanced the sound will gradually switch to a type of chorus. I set the Element Amplitude Levels and MW Controller Element Level depths so that there’s a small amount of the sound that’s faded still audible at either extreme of the MW. However, they could be programmed so that only one sound is audible at max or min MW positions. Please note that I made these Voices just to demonstrate techniques, so they aren’t particularly polished. Rather than loading the entire file, one Voice can be loaded at a time to a User location. File Attachments
2&3wayVoices 5pinDIN.n3.X3V.zip (File Size: 5KB - Downloads: 182) |
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Thank you Guru 5pinDIN..
I was exactly thinking on that line..
Thanks ! |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome - I’m glad you’ve got things worked out. |
dsetto
Total Posts: 434
Joined 01-24-2014 status: Enthusiast |
Great optimization of the Motif approach. |