Old Motifator threads are available in the Archive.
kstenz
Total Posts: 18
Joined 08-15-2008 status: Regular |
I am trying to load individual voices and/or and entire “inspiration” files to my user files.
|
jozsihome
Total Posts: 94
Joined 11-28-2015 status: Experienced |
Hi, AFAIK for the entire inspiration to load at the same time you would need a 2G module. Possibly you can load two banks of the package in one shot into a 1G module.
What is most important samples stored in x3a and x6a files are located at fixed slots/adresses that cannot be shifted easily. So if you have one single sample and you are going to load an x6a that contains another one single voice and its waveform/sample is pointing to the already occupied slot that you get the same message and you canot load the file even if you have a lot of free space in your flash.
|
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
The MOXF keeps a list of pointers to each waveform in the fash board. There is a max of 2048 waveforms allowed, and it is possible to run out of waveform pointers before you have filled up the flash memory with samples. If either the memory is full or the waveform limit is reached, you get the sample memory full error. Open the Utility menu and select the tab for Flash, this will let you scroll through the waveform list. Scroll to the end of the list to see how many waveforms are loaded. To give you an idea, in my Motif XF, I have two boards and each is over 50% full but each has only a little over 200 waveforms loaded, far from the limit. Let us know if you have hit the waveform limit or not and we can go from there on what to do. BTW, Inspiration in a Flash has only 384MB of samples, so it will fit in a 512MB board. |
jozsihome
Total Posts: 94
Joined 11-28-2015 status: Experienced |
You’re right, sorry for the wrong info, I mixed up with an another package (where a load per bank approach was suggested for 512MB users).
The INSPIRATION IN A FLASH Library is made up of the following data:
|