Old Motifator threads are available in the Archive.
kstenz
Total Posts: 18
Joined 08-15-2008 status: Regular |
Brand spanking new to the MOXF. PG 36 in owners manual says to transpose in performance mode…
|
cmayhle
Total Posts: 3116
Joined 10-05-2011 status: Guru |
Once you press EDIT, you must then press the appropriate PART button (1-4) to choose the PART you wish to EDIT.
1 Press the [EDIT] button in the Performance mode.
BTW, do you also have the MOXF Reference Manual? You can download it Here. |
kstenz
Total Posts: 18
Joined 08-15-2008 status: Regular |
I’m sorry, don’t mean to sound stupid but when I am in Perform mode and hit the Edit/compare button it goes to a screen with the name of the performance, Catagories, then on the bottom I have on top line, Name, Plymode, EQOFS, Porta, Other, Char
Yes, I have looked at the manuals, which say the same thing so I must be doing something terribly wrong but have no idea what it is.
1 turn on kb
|
cmayhle
Total Posts: 3116
Joined 10-05-2011 status: Guru |
When you press the EDIT button, I am guessing that the COMMON button is also lit. If it is, this means you are in COMMON EDIT. You then must get into PART EDIT. You must press a PART button 1-4 (as pointed out above) to get into PART EDIT...for the PART number you would like to modify the pitch on. The PART buttons are numbered 1-16, but only numbers 1-4 apply to a PERFORMANCE. |
kstenz
Total Posts: 18
Joined 08-15-2008 status: Regular |
Got IT, finally. Thank you. |