Old Motifator threads are available in the Archive.
joden1
Total Posts: 52
Joined 07-26-2015 status: Experienced |
The factory performance “Don’t Look” does something strange when I try to edit any of the sounds....and this is simply going to the sound number on the VOICE page and pressing either the DEC or INC button...I am touching nothing else. the perf starts and plays okay but as soon as I try to change any of the four sounds assigned, the perf stops and will not restart even if the original sound is re-selected. I have to move to the next perf and then back to get it to play again. Can someone advise what parameters are causing this as I can find nothing about it in the manuals. thanks |
rhuff
Total Posts: 34
Joined 04-23-2012 status: Regular |
My MOXF is packed right now, but off the top of my head, I think you’re running into the “Param with Voice” feature. Without turning this on in Performance/Edit/Part, when you edit away from the voice, the arpeggios go with it. Try turning on the “Param with Voice” box and trying again to see what happens. |
joden1
Total Posts: 52
Joined 07-26-2015 status: Experienced |
cheers |